Find Measurement B that you worked out for the neck area on the measuring tape. On the top right side where the folded edge is, is where you will mark and cut out the shape for the neck. You now should have it folded in half with the right side of the material facing you. Take hold of the right side of this piece and pull it across to the left - line the fabric up and smooth it out. Have the longest side running across horizontally and the shortest side going up vertically. Do this by placing the fabric in front of you on a work surface with the wrong side up. Once you've got your size of fabric sorted for the actual cloak section which is made from one continuous piece, you need to fold it in half. ![]() This will be referred to as Measurement B. Once you've got this measurement, you need to halve it and also add on an inch for the seam allowance. You'll probably want to allocate quite a bit more than that.Ĭollar / Neck Area: Measure very loosely around the neck area - you want the measuring tape to feel as loose as you'd like the finished collar area or neck section to be. This was for a very small sized 7 year old at the time of making. That measurement does not include making the hood for which we also needed another piece around 60 cm / 23 inches x 25 cm / 9 inches in size. In our case we needed a piece of fabric that was a minimum of 100 cm / 39 inches long x 200 cm / 78 inches wide. I will refer to this as Measurement A.įabric Size Estimates: So the size of your fabric for a hoodless version is going to be Measurement A for the Length x Measurement A Doubled for the Width. ![]() We needed a long cloak so I measured from the top of the shoulder down to the ankles and came up with a 100 cm / 39 inch length after also adding on an inch for seam allowances. Will it be a shorter cape or a long, flowing cloak. Length of Cape: First you need to know what length you want this to be. A child's version is naturally going to require quite a bit less than an adult one. The longer and fuller you want a costume cloak to be, the more fabric you will need to use. Luckily a had a huge piece of fabric to work with from an old curtain. Since I was working without a pattern, the measuring tape was pretty crucial to taking different measurements on my daughter to work out sizes needed. This was the essence of what I needed to make this project: a sewing machine (which incidentally broke down while making this project!) a measuring tape, fabric scissors, tailor's chalk, a large piece of fabric and a strong coffee or two. The curtain fabric I picked out is also heavy enough as it is. ![]() For a quick costume piece, going to the expense and trouble of lining was not going to be worth the effort. I chose not to line this cloak because lining would have added to the complexity of making it as well as to the cost. You could also follow the instructions and leave out the hooded section to make an even easier hood-less cape. It comes in just two pieces of fabric with the large cape section as one piece and the hood as another. Note that this project is to make a simple, unlined cloak with a hood.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |